Produces hard, dense joints that resist shrinking, cracking and wear. Formulated for durability, color consistency and quick curing, Polyblend Sanded Grout ccommodates 1/8″1/2″ (313mm) joints for interior or exterior installations, including floors, countertops, walls, ceilings, showers, fountains and pools.
Highlights:
- Consistent color
- Smooth, dense grout joints
- Resists shrinking, cracking, powdering and wear
- Meets or exceeds ANSI A118.6 standards
- Rated for residential to extra heavy commercial use
Suitable Tile Types:
- Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile Impervious porcelain and glass tile
- Brick and stone veneer
- Cement-based precast terrazzo
- Natural stone tile
- Composition of Product:Polyblend Sanded Grout is a dry, Portland cement based grout with silica sand, inorganic aggregates and chemicals.
Limitations to the Product:
- Should not be installed when ambient surface temperature is lower than 50°F (10°C) or higher than 100°F (38°C).
- Some ceramic tile, marble or stone can be scratched, stained or damaged by sanded or pigmented grout. White grout is generally best for light-colored marble or granite. Test a small area prior to use.Polyblend NonSanded
- Grout may be appropriate for tile not suitable for sanded grout. Tile with high absorption, surface porosity or rough, textured surfaces and certain types of porcelain may require sealing prior to grouting to prevent staining. Use TileLab® SurfaceGard® Sealer to prevent grout staining, when required.
- Color variation can occur due to tile type, tile porosity, jobsite conditions, application and cleaning techniques. Variation can be minimized by following directions and using as little water as possible for cleanup.
- Chemicals in salt-based pool filtration systems can cause a reaction with blue, green and red grouts. Contact Technical Services for recommendations.
